數字示波器GDS-2064|華清儀器優惠提供固緯GDS-2064數字存儲示波器的特點:
· 數字示波器GDS-2064帶寬60MHz 頻寬
· 數字示波器GDS-2064 4輸入通道
· 1GSa/s 即時取樣率以及 25GSa/s 等效取樣率
· 25000點之記憶體長度
· 5.6 吋 TFT 彩色 LCD 熒幕
· 支援USB HOST/DEVICE：可使用USB隨身碟及 USB 印表機
· 支援AC/DC電源操作模式（選購）
數字示波器GDS-2064|華清儀器優惠提供固緯GDS-2064數字存儲示波器的的技術參數:
VERTICAL |
Channels | 4 |
Bandwidth | DC ~ 60MHz (-3dB) |
Rise Time | 5.8ns Approx. |
Sensitivity | 2mV/div ~ 5V/div (1-2-5 increments) |
Accuracy | ∮(3% x |Readout|+0.05 div x Volts/div+0.8mV) |
Input Coupling | AC DC & Ground |
Input Impedance | 1M∮2% ~16pF |
Polarity | Normal & Invert |
Maximum Input | 300V (DC+AC peak) CATII |
Waveform Signal Process | + - FFT |
Offset Range | 2mV/div ~ 20mV/div : 0.5V ; 50mV/div ~ 200mV/div : 5V ; 500mV/div ~ 2V/div : 50V ; 5V/div : 300V |
Bandwidth Limit | 20MHz (-3dB) |
TRIGGER |
Sources | CH1 CH2 Line EXT |
Modes | Auto-Level AUTO NORMAL SINGLE TV Edge Pulse Width Time-delay Event-delay |
Coupling | AC DC LF rej. HF rej. Noise rej. |
Sensitivity | DC ~ 25MHz : Approx. 0.5div or 5mV
25MHz ~ 60MHz : Approx. 1div or 10mV |
EXT TRIGGER |
Range | 15V |
Sensitivity | DC ~ 30MHz : ~ 50mV ; 30M ~ 60MHz : ~100mV |
Input Impedance | 1M∮2% ~ 16pF |
Maximum Input | 300V (DC AC peak) CATII |
HORIZONTAL |
Range | 1ns/div ~ 10s/div (1-2-5 increments); ROLL : 250ms/div ~ 10s/div |
Modes | MAIN WINDOW WINDOW ZOOM ROLL SCAN X-Y |
Accuracy | ∮0.01% |
Pre-Trigger | 20 div maximum |
Post-Trigger | 1000 div |
X-Y MODE |
X-Axis Input | Channel 1 |
Y-Axis Input | Channel 2 |
Phase Shift | ∮3 at 100kHz |
SIGNAL ACQUISITION |
Real-Time Sample Rate | 1GSa/s maximum |
Equivalent Sample Rate | 25GSa/s maximum |
Vertical Resolution | 8 Bits |
Record Length | 25K Dots maximum |
Acquisition Mode | Normal Peak Detect Average |
Peak Detection | 10ns |
Average | 2 4 8 16 32 64 128 256 |
CURSORS AND MEASUREMENT |
Voltage Measurement | Vpp Vamp V avg Vrms Vhi V l o Vmax Vmin Rise Preshoot/ Overshoot Fall Preshoot/Overshoot |
Time Measurement | Freq Period Rise Time Fall Time Positive Width NegativeWidth Duty Cycle |
Delay Measurement | Eight different delay measurement |
Cursors Measurement | Voltage difference between cursors (V) Time difference between cursors (T) |
Auto Counter | Resolution : 6 digits
Accuracy : ∮2%
Signal Source: All available trigger source except the Video trigger mode |
CONTROL PANEL FUNCTION |
Autoset | Adjust Vertical VOLT/DIV Horizontal TIME/DIV and Trigger level automatically |
Save Setup | Up to 20 sets of measurement conditions |
Save Waveform | 24 sets of waveform |
DISPLAY |
TFT LCD Type | 5.6 inch |
Display Resolution | 234 (Vertically) x 320 (Horizontally) Dots |
Display Graticule | 8 x 10 divisions ; 8 x 12 divisions (menu off) |
Display Brightness | Adjustable |
INTERFACE |
Go/NoGo Output | 5V Maximum/10mA TTL Open Collector Output |
RS-232 Interface | DB 9-pin male DTE RS-232 interface |
GPIB Interface (Option) | Fully programmable with IEEE 488.2 compliance |
USB | USB Host/Device 2.0 full speed supported |
POWER SOURCE |
Line Voltage Range | AC 100V ~ 240V 48Hz ~ 63Hz Auto selection |
Battery Power(Option) | Battery : 11.1V Li-Ion battery pack
Charge Time : 8 hours (Power ON)
Operating Time : 3 hours depending on operating condition |
MISCELLANEOUS |
Multi-Language Menu | Available |
Online Help | Available |
Time Clock | Time and Date Provide the Date/Time for saved data |
DIMENSIONS &WEIGHT | 254D x 142H x 310W(mm)
Approx. 4.3kg |
